10
Cleaning and chair maintenance
` The chair should be cleaned after use using an anti bacterial detergent. Do not use bleach or phenol based products.
` A chair inspection should be carried out on a quarterly basis and recorded.
` A mild lubricant can be used on all moving parts except track runner system.
Inspection checklist:
1. Top handle: Locks in raised and lowered position.
2. Brake levers: Locks in ‘On’ position and releases as needed.
3. Brake cables: Secure and undamaged.
4. Brake pads: Gives secure braking to wheels.
5. Wheels - Front: Pivot and rotate normally.
6. Wheels - Back: Rotate normally.
7. Track release bar: Releases and closes into secure positions.
8. Track: Rotates manually by hand, not ‘sticking’.
9. Straps / Clips: Straps undamaged / Clips functional.
10. Chair fabric: Clean and undamaged.
11. Extending handles: Lockable and smooth to operate.
12. Foot rest: Freedom of movement but with slight resistance.
To Next Page
Loading...