Potek 2-6-10 Amp Smart Charger User Manual

POTEK'
216110 AMP SMART
GHARGER
J-}K
.st\
*o
.o
.$
ka*.S
/ i\,
rf
!t
b\l
S\!l
*
u-o\

Potek 2-6-10 Amp Smart Charger Specifications

Power

rated input voltage	120 V AC/60 Hz
input current	2 A
rated output voltage	12 V DC

Charging Specifications

maximum charging voltage	14.8±0.2 V
floating charge voltage	13.6±0.2 V
output current	2 A

Operating Environment

ambient temperature	0°C to 40°C

Weight and Dimensions

dimension (L-W-H)	8.66 x 5.59 x 5.31 inches
weight	2.7 lb

Summary

Features

Charger Safety Features

Operational Safety Protections

Important Safety Information

Personal Safety

Advises on personal protection, handling cords, and electrical safety.

Explosion and Fire Hazard Warnings

Highlights risks of explosive gases and fire when working with batteries.

Equipment Damage Precautions

Lists conditions to avoid to prevent damage to the charger.

Charging Operation

Preparation for Charging

Charging Battery in Vehicle

Charging Operation - Advanced

Connecting to Grounded Systems

Charging Battery Removed from Vehicle

Selecting Charging Rate

Battery Reconditioning Function

Digital Display Information

Fault Codes and Troubleshooting

Specific Fault Codes (F01, F02, F04, F05)

Lists fault codes, their causes, and recommended solutions.

Unrecognized Battery Fault (8-8-8)

Explains the 8-8-8 fault code and methods to revive a dead battery.

3-Stage Charging Process

Charging Curve Stages

General Troubleshooting

Common Problems and Solutions

Addresses common issues like LED indicators, low voltage, and reverse polarity.