To Next PageTo Next Page
Need help?Do you have a question about the Potterton Gold 6 kW and is the answer not in the manual?
Lists the main advantages and capabilities of the electric boiler.
Details performance metrics, voltages, and product codes for the boilers.
Provides detailed measurements and clearances required for mounting the boiler.
Explains pipework sizes, connection methods, and air venting requirements.
Discusses suitability for sealed/open vented systems and heating-only applications.
Details the main power, control signal, and pump connections to the boiler.
Outlines pumped systems, independent controls, zoning, and bypass requirements.
Addresses controls for new installations and upgrades in existing properties.
Guides through initial electrical and pump setup before full system power-up.
Details checks for supply, demand indicators, and temperature rise.
Explains the function of SUPPLY, CALL, HEAT, and ALARM indicators.
Describes how to adjust the output temperature for different boiler series.
Identifies key components like FS1 fuse, temperature switch, thermistors, and PCBs.
Details the procedure for safely disconnecting and removing the main power PCB.
Guides on installing the new PCB, applying compound, and reconnecting.
Provides a 3-step process to reset the boiler after a fault condition.
Lists the electrical specifications for isolation relays used in multi-boiler systems.
Explains how a relay prevents overload when an electric shower is used simultaneously.
Information regarding the recyclability and disposal of the product.
Lists part numbers and descriptions for common replacement components.
Contact information and policy for technical assistance and replacement parts.
General
