1
pottery barn kids
MADISON BOOKRACK TALL
PRE-ASSEMBLY:
Remove all parts and hardware from box and lay out on a carpeted or scratch-free work surface (The
shipping box provides and ideal work surface), as this will avoid damaging any parts during assembly.
Do not dispose of any contents until assembly is completed to avoid accidentally discarding small parts
or hardware.
Two people are recommended for ease of assembly.
Use the parts and hardware lists to identify and separate each of the pieces included prior to starting
assembly.
The illustrations provided allow for easier assembly when used in conjunction with the assembly
instructions.
Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions may
cause the bolts to misalign during assembly.
If using power tools to aid in assembly please use caution. Power tools can damage hardware of split
wood.
PARTS INCLUDED:
A – Bookrack Base (x1)
B – Left side panel (x1)
C – Right side panel (x1)
D – Front rail (x4)
E – Shelf with holes (x1)
F – Shelf w/o holes (x2)
TOOLS REQUIRED:
Phillips head screwdriver (not included)
G – Ball Tip Allen Key (included)
HARDWARE:
H –Allen bolt 1/4”x45x15mm (x6)
I –Allen bolt 1/4”x32x15mm (x4)
To Next Page
Need help?
General
