To Next PageTo Next Page
Need help?Do you have a question about the Pottinger CAT 230 plus and is the answer not in the manual?
General| Brand | Pottinger |
|---|---|
| Model | CAT 230 plus |
| Category | Lawn Mower |
| Language | English |
Machine's CE marking and conformity statement.
Explanation of various safety symbols and their meanings.
Lists specifications like working width, power, weight, etc.
Lists additional features available for the machine.
Instructions for attaching the implement to the tractor.
Steps to raise the mounting frame for transport.
Aligning the tractor's lower link pins with the implement frame.
Standard lower link pin dimensions for tractor attachment.
Optional lower link pin dimensions for tractor attachment.
Detailed steps for connecting the mower to the tractor's 3-point linkage.
Instructions for using the implement's jack stand.
Steps for parking the implement using its jack stand.
Procedure to safely move the mower from working to transport mode.
Information on installing and using lighting for road travel.
Procedure to safely move the mower from transport to working mode.
Steps for correctly parking the mower after use.
Guidelines and regulations for transporting the machine on public roads.
Instructions for securing the machine during parking.
Key checks and preparations before initial operation.
Setting tractor hydraulics for optimal ground adaptation.
Crucial safety precautions before and during operation.
Actions to take and checks required after a collision.
How to adjust the cutting height of the mower.
How to operate the mower with the conditioning unit engaged.
Steps for removing and refitting the conditioner rotor.
Settings for the "Extra dry" system.
How to set guiding plates for swathing.
Adjusting guiding plates to control spread width.
Explanation and function of the anti-hindrance safety feature.
Adjustment of the safety device hex nut.
General safety guidelines for maintenance.
Information about mower knives.
Step-by-step guide for replacing mower knives.
Warning regarding blade holder wear and replacement.
How to check the security of blade mountings.
Procedure for checking and adjusting mowing discs.
Maintenance procedure for the conditioner rotor.
Steps for storing the mower during winter.
End-of-season maintenance tasks.
Procedure for raising the implement frame.
General safety advice for operating the machine.
Specifies the intended purpose and conditions for machine use.
Information regarding the use of genuine spare parts.
Importance of keeping protection devices on the machine.
Essential checks and operator awareness before operation.
Warning about potential asbestos in components.
Rules against carrying passengers on the machine.
Factors affecting tractor driving with attached implements.
Various general safety points and procedures.
Guidelines for cleaning the machine.
Information related to the PTO driveshaft.
How to determine the correct driveshaft length.
Operational rules and safety for the driveshaft.
Steps to cut the driveshaft to the correct length.
Maximum deflection angles for wide-angle joints.
Maximum deflection angles for standard joints.
Maintenance procedures for the driveshaft.
Use of the retaining chain for the driveshaft guard.
Explanation of the overload clutch mechanism.
Checks and procedures for friction clutch driveshafts.
Considerations for mounting implements to tractors.
Calculating weight distribution and ballasting requirements.
Calculating the actual front axle load.
Calculating the actual total weight of tractor and implement.
Calculating the actual rear axle load.
Understanding and checking tyre load limits.
Document certifying machine compliance with EEC directives.
