EasyManua.ls Logo

Poulan Pro 115153026 - User Manual

Poulan Pro 115153026
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Instruction Manual
Manual de Instrucciones
Manuel d’Instructions
P3818
Poulan
7349 Statesville Road
Charlotte, NC 28269
ENGLISH
ESPAÑOL
FRANÇAIS
R
For Occasional Us e O nly
WARNING:
Read and follow all Safety Rules and Operating Instructions before
using this product. Failure to do so can result in serious injury.
ADVERTENCIA:
Lea e l manual de instrucciones y siga todas las advertencias e en-
strucciones de seguridad. El no hacerlo puede resultar en lesiones
graves.
AVERTISSEMENT:
Lire le manuel d’instructions et bien respecter tous les avertisse-
ments et toutes les instru ctions de sécurité. Tout défaut de le faire
pourrait entraîner des blessures graves.
Poulan
850 Matheson Blvd. West
Mississauga, Ontario L5V 0B4
115153026 Rev. 4 3/15/10 BRW
Please do not return product to retailer.
Por favor, no devuelva el producto al lugar de compra.
Veuillez ne pas retourner le produit au détaillant.
1--800--554--6723
www.poulan.com
Register your product online at:
Regis tre su producto en nea en:
Enregistrez votre produit en ligne à l’adresse :

Questions and Answers

  • M
    Michael WeaverAug 11, 2025
    What to do if my Poulan Pro Chainsaw engine will not start?
    • J
      Jason CameronAug 11, 2025
      If your Poulan Pro Chainsaw engine won't start or dies quickly, here's what to check: * Ensure the ignition switch is set to ON. * Refill the fuel tank with the correct fuel mixture. * Install a new spark plug. * Check the fuel filter for dirt and replace if needed. Also, inspect the fuel line for kinks or splits, and repair or replace it as necessary. * If the engine is flooded, refer to the “Difficult Starting” section in the Operation Section.
  • B
    Brian KerrAug 17, 2025
    How to fix Poulan Pro 115153026 Chainsaw that will not idle properly?
    • X
      xgordonAug 18, 2025
      If your Poulan Pro Chainsaw engine won't idle properly, you should first check the idle speed, referring to the “Carburetor Adjustment” section in the Service and Adjustments Section. If the problem persists, the carburetor may require adjustment by an authorized service dealer.
  • V
    Victoria MoranAug 23, 2025
    What to do if the chain moves at idle speed on my Poulan Pro 115153026?
    • B
      Brenda OconnellAug 23, 2025
      If the chain on your Poulan Pro Chainsaw moves at idle speed, you should first check the idle speed, referring to the “Carburetor Adjustment” section in the Service and Adjustments Section. If the problem persists, the clutch may require repair by an authorized service dealer.
  • O
    ojohnsonAug 29, 2025
    Why Poulan Pro 115153026 engine will not accelerate?
    • J
      jenniferdorseyAug 30, 2025
      If your Poulan Pro Chainsaw engine won't accelerate, lacks power, or dies under a load, consider the following: 1. Clean or replace the air filter. 2. Clean or replace the spark plug and regap it. 3. Ensure the chain brake is disengaged. 4. If these steps don't resolve the issue, the carburetor may require adjustment by an authorized service dealer.
  • K
    Kevin MartinezSep 4, 2025
    Why does my Poulan Pro Chainsaw smoke so much?
    • B
      Bridget TaylorSep 5, 2025
      If your Poulan Pro Chainsaw engine smokes excessively, it's likely due to too much oil in the fuel mixture. Empty the fuel tank and refill it with the correct fuel mixture.

Poulan Pro 115153026 Specifications

General IconGeneral
BrandPoulan Pro
Model115153026
CategoryChainsaw
LanguageEnglish

Related product manuals