Poulan Pro 545186849 User Manual

ENGLISH ESPAÑOL
FRANÇAIS
WARNING:
Read and follow all Safety Rules and Operating Instructions before
using this product. Failure to do so can result in serious injury .
ADVERTENCIA:
Lea el manual de instrucciones y siga todas las advertencias e
instrucciones de seguridad. El no hacerlo puede resultar en le-
siones graves.
AVERTISSEMENT:
Lire le manuel d’instructions et bien respecter tous les avertisse-
ments et toutes les instructions de sécurité. Tout défaut de le
faire pourrait entraîner d es blessures graves.
For Occa sional Us e Only
R
545186849 Rev. 3 3/1/0 9 BRW
Poulan PRO
1030 Stevens Creek Road
Augusta, GA 30907
Poulan PRO
850 Matheson Blvd. W est
Mississauga, Ontario L5V 0B4
Instruction Manual
Manual de Instrucciones
Manuel d’Instructions
PP25E
Please do not return unit to retailer.
Por favor, no devuelva el aparato al lugar de compra.
Veuillez ne pas retourner l’outil au détaillant.
1- 800-554-6723
www.poulan--pro.com

Poulan Pro 545186849 Specifications

General

Engine Type	2-Cycle
Displacement	25 cc
Weight	12.3 lbs
Power Source	Gasoline
Power Output	1.0 HP
Cutting Width	17 inches
Type	Gas Trimmer
Shaft Type	Straight

Summary

SAFETY RULES

OPERATOR SAFETY

General safety guidelines for the operator.

LINE TRIMMER SAFETY

Safety precautions specific to line trimmer operation.

EDGER SAFETY

Safety precautions specific to edger operation.

FUEL SAFETY

Guidelines for safe handling and storage of fuel.

BLOWER/VACUUM SAFETY

Safety precautions for blower and vacuum attachments.

BRUSHCUTTER SAFETY

Safety precautions for brushcutter attachment use.

CULTIVATOR SAFETY

Safety precautions for cultivator attachment use.

HEDGE TRIMMER SAFETY

Safety precautions for hedge trimmer attachment use.

POLE PRUNER SAFETY

Safety precautions for pole pruner attachment use.

SNOW THROWER SAFETY

Safety precautions for snow thrower attachment use.

ASSEMBLY

INSTALLING TRIMMER OR EDGER ATTACHMENTS

Step-by-step guide to attach trimmer or edger.

OPERATION

KNOW YOUR TRIMMER

BEFORE STARTING ENGINE

FUELING ENGINE

Procedures and warnings for refueling the engine.

HOW TO STOP YOUR UNIT

Steps to safely shut down the engine.

HOW TO START YOUR UNIT

General guidance on starting the engine.

STARTING A COLD ENGINE

Detailed steps for starting a cold engine.

STARTING A WARM ENGINE

STARTING A FLOODED ENGINE

REMOVING LINE TRIMMER ATTACHMENT, EDGER ATTACHMENT OR OTHER OPTIONAL ATTACHMENTS

INSTALLING OPTIONAL ATTACHMENTS

LINE TRIMMER ATTACHMENT OPERATING POSITION

CUTTING METHODS

EDGER ATTACHMENT OPERATING POSITION

EDGING

SETTING THE EDGING DEPTH

MAINTENANCE

CHECK FOR DAMAGED OR WORN PARTS

CLEAN AIR FILTER

REPLACE SPARK PLUG

EDGER BLADE MAINTENANCE

SERVICE AND ADJUSTMENTS

REPLACING THE LINE

REPLACING THE TRIMMER HEAD

EDGER BLADE REPLACEMENT

CARBURETOR IDLE SPEED ADJUSTMENT

STORAGE

SEASONAL STORAGE

TROUBLESHOOTING TABLE

LIMITED WARRANTY