To Next PageTo Next Page
Need help?Do you have a question about the Poulan Pro PP446 and is the answer not in the manual?
General| Brand | Poulan Pro |
|---|---|
| Model | PP446 |
| Category | Pole Saw |
| Language | English |
Visual symbols for safety instructions and warnings.
Essential safety rules for pruner operation.
PPE requirements and safe distances for bystanders.
Guidelines for two-handed use, ventilation, and cutting limb sizes.
Regular service importance and safe fuel handling procedures.
Definition and causes of kickback for operator awareness.
Techniques to minimize kickback risk, such as proper chain tension and work area clearing.
How to maintain balance and grip for control during use.
Built-in features designed to reduce kickback hazards.
General safety rules for all optional attachments.
Specific safety rules for using the line trimmer attachment.
Safety precautions for operating the edger attachment.
Safety guidelines for using blower and vacuum attachments.
Safety measures specific to the brushcutter attachment, including blade handling.
Safety precautions for operating the cultivator attachment.
Key safety points for hedge trimmer operation, focusing on blade safety.
General, discharge chute, and operating area safety for snow throwers.
Step-by-step guide for connecting the pruner attachment to the powerhead.
Instructions for assembling and adjusting the shoulder strap for proper fit.
Procedure to move the shoulder strap clamp for optimal balance.
Familiarization with the pruner's components and controls.
Explanation of ON/OFF switch, primer bulb, choke, and coupler functions.
Essential pre-operation checks, including fuel safety.
Detailed steps for starting the engine when cold.
Precautions to take when starting the engine, avoiding contact with hot parts.
Importance and procedure for lubricating the guide bar and chain.
Procedures for starting the engine when warm or if it becomes flooded.
How to operate the coupler for attaching and detaching optional accessories.
Steps for safely attaching and detaching tool attachments.
How to perform cuts effectively and safely.
Warnings and guidelines to follow while pruning, like avoiding overhead reaching.
How to properly check and adjust the chain tension.
Inspecting for loose parts, damaged components, and cleaning the unit.
Identifying and addressing worn or damaged components.
Step-by-step guide for adjusting chain tension.
Assessing chain sharpness and maintaining the guide bar.
Cleaning the air filter and replacing the spark plug.
Information regarding the muffler and spark arresting screen.
Recommended procedures for chain sharpening and replacement.
Referencing chain tension checks from the maintenance section.
How to adjust the carburetor for optimal engine performance.
Adjusting the idle speed screw to ensure proper engine idling.
Procedures for storing the unit, including fuel system preparation.
Specific steps for preparing the unit for seasonal or extended storage.
Common causes and remedies for the engine failing to start.
Solutions for issues like poor idling, lack of power, or excessive smoking.
Addressing the problem of the chain moving when the engine is idling.
Details on warranty coverage periods and conditions for parts and labor.
Information on the warranty for the engine's emission control system.
Owner's rights, responsibilities, and limitations concerning the warranty.
List of parts covered under the emission control warranty.
