To Next PageTo Next PageWhat to do if the motor runs, but the chain is not rotating on my Poulan Pro PPB40PS Pole Saw?
If the motor of your Poulan Pro Pole Saw is running, but the chain isn't rotating, it could be due to several reasons: - The chain tension might be too tight. - There might be damage to the guide bar and chain. Inspect the guide bar and chain for damage and re-tension the chain.
Why is the bar and chain on my Poulan Pro Pole Saw running hot and smoking?
If the bar and chain of your Poulan Pro Pole Saw are running hot and smoking, it could be due to over-tensioning of the chain or an empty chain oil tank. Make sure that the chain is properly tensioned and that the chain oil tank is full.
General| Engine Type | 2-Cycle |
|---|---|
| Engine Displacement | 40cc |
| Bar Length | 8 in |
| Oil Capacity | 6.8 fl. oz. |
| Maximum Reach | 12 ft. |
Importance of professional servicing and using identical replacement parts for safety.
Crucial safety precautions for operating the polesaw, including grip and limb cutting.
Guidelines to ensure children's safety around the operating polesaw.
Explanation of kickback and how to prevent it, including maintaining a firm grip.
Detailed information on preventing kickback forces through proper technique and maintenance.
List of all items included in the product packaging.
Step-by-step instructions for safely removing the battery pack from the tool.
Instructions for correctly installing the battery pack into the pole saw.
Procedure for assembling the poles of the unit, connecting handle, extension, and power head.
Familiarization with the polesaw's operating features and safety rules before use.
Instructions on how to safely start and stop the polesaw.
Procedure for adjusting the length of the pole saw for optimal use.
Essential steps and precautions before beginning any cutting operations.
Step-by-step guide on how to perform basic cuts safely and effectively.
Guidance on trimming branches and limbs, including techniques and safety.
Routine cleaning and care instructions for the polesaw's parts.
A brief guide to assembling and adjusting the bar and chain tension.
Detailed steps for checking and adjusting the chain tension correctly.
Instructions for removing and installing the guide bar and saw chain.
How to fill and maintain the automatic chain oiler reservoir.
Information on maintaining the chain, including sharpening indicators.
Step-by-step guide on how to properly sharpen the saw chain cutters.
Instructions for charging the battery pack using the provided charger.
Guidelines for cleaning and maintaining the battery charger.
Recommendations for storing and recharging the battery pack.
How to check the remaining charge level of the battery pack.
