3
IDENTIFICATION OF SAFETY SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better and
safer.
Symbol Name Designation/Explanation
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watts Power
hrs Hours Time
no No Load Speed Rational speed, at no load
Class II Construction Double-insulated construction
/min
Per Minute
Revolutions, strokes, surface speed, orbits,
etc., per minute.
Lithium-Ion Battery Recycling
Designates that this tool is in compliance
with Lithium-Ion battery recycling program
requirements.
Safety Alert Symbol Precautions that involve your safety.
Read Operator’s Manual
To reduce the risk of injury, user must read
and understand operator’s manual before
using this product.
Eye and Head Protection
Wear eye and head protection when
operating this equipment.
Gloves
Wear non-slip, heavy-duty protective gloves
when handling the pole saw and the blade.
Safety Footwear
Wear non-slip safety footwear when using
this equipment.
Kickback DANGER! Beware of kickback.
Risk of Electrocution DANGER! Risk of electrocution!
Electric Shock
Failure to use in dry conditions and to
observe safe practices can result in electric
shock.
No Hands Symbol
Failure to keep your hands away from the
blade will result in serious personal injury.
Keep Bystanders Away
Keep all bystanders at least 50 ft. (15 m)
away.
Wear Ear Protection
Wear ear protection when operating this
equipment.
To Next Page
Loading...
