Powakaddy FW3 User Manual

Your PowaKaddy trolley is easy to maintain.
Store your trolley inside
Never jet wash or immerse in water. Clean the trolley using a sponge and warm water to remove mud, grass, and other
debris.
Occasionally remove the wheels and apply grease to the axles and wheels.
Only use approved PowaKaddy parts for repairs.
Once your battery is connected your trolley is ready to use. The control
functions are detailed below.
Power Indicator:
Displays whether power is being
applied to the drive system.
The LED light will illuminate red on start up to indicate the motor power
conditionaso.Presstheyellowcontroldialinthecentretopowerthemotor
on,theLEDwillilluminateGreen.Pressagaintoturnthemotoro;theLED
will change back to Red.
Control Dial:
Rotate the central control dial to adjust the speed of the trolley when the
motor is powered on. Rotate the control clockwise to increase the speed and
counter-clockwise to decrease the speed. Press to pause and resume your
selected speed.
Power Indicator
4
Controls Overview
Central Control Dial
Should you experience a problem with your PowaKaddy product please go to www.powakaddy.com/support
Maintenance
Yourtrolleywillalreadybepre-settorunstraight.Ifyound
your trolley tracking to the left or right you can re-adjust this by
releasing the front wheel lever and rotating the adjustment roller.
Rotate up to make your trolley track more to the LEFT and rotate
down to track more to the RIGHT. Once you are happy the trolley
is running straight re-apply the lever to lock in position.
Front Wheel Adjustment
3
1
2
On
O
SN:

Powakaddy FW3 Specifications

General

Motor	230W
Foldable	Yes
Display	LCD
Frame	PowaFrame
Material	Aluminium
Weight	9.4kg (without Battery)
Range	Up to 36 holes (depending on battery)