Need help?Do you have a question about the Power Acoustik BASS-10 and is the answer not in the manual?
General| Brand | Power Acoustik |
|---|---|
| Model | BASS-10 |
| Category | Musical Instrument Amplifier |
| Language | English |
Explains the Bass Driver circuit that recreates and injects low frequency information.
Details the unique equalization circuit that contours restored bass to speaker systems.
Describes the dash mountable remote control for instant adjustments from the driver's seat.
Notes the LED indicators on the chassis that flash when the bass maximization circuit is activated.
Highlights the PFM Subsonic Filter Switch for fine-tuning bass response and cleaning up subsonic information.
Explains the circuit that maximizes bass output while protecting speakers from destructive bursts.
Details the external components, including inputs, outputs, dash remote, power connector, and Para-Bass controls.
Explains internal jumpers for input grounding, ground isolation, and bass output control adjustments.
Guides on connecting the unit's power source, including B+(12V), REMOTE, and GND wires.
Illustrates the signal path connection to an equalizer, crossover, and amplifiers for speakers.
Explains how vehicle acoustics and controls affect bass response and how to adjust Sweep and Width.
Provides guidance on changing Bass Output settings based on amplifier input voltage and minimum speaker size.
Offers solutions for common issues like no power, distortion, or engine noise.
Lists the hardware required for installation, including tapping screws and washers.
To Next Page