Power Acoustik BASS-12 User Manual

Recreates and injects low frequency information back into the signal path for increased bass impact.

Contour the restored bass to match your specific speaker systems for optimal sound.

Allows remote adjustment of bass effects from the driver's seat, featuring an LED indicator.

Visual LED indicators on the chassis that flash when the bass maximization circuit is activated.

Fine-tunes bass response by filtering unwanted subsonic information for cleaner sound.

Manages deep bass output while protecting speakers from destructive bursts.

Utilizes balanced input circuit to minimize noise and handle high signal voltages up to 15 volts.

RCA connectors for connecting to the next component after the BASS-12, such as a crossover or amplifier.

Helps with speaker control and amplifier power management, set with frequencies from 35Hz-80Hz.

Controls the overall bass level adjustment via the dash remote.

Connection point for the main power supply to the unit.

Two knobs (Sweep, Wide) to control bass restoration center frequency and range.

Three LEDs that flash when the bass maximization circuit is activated.

Indicates when the unit is powered on.

Jumper setting for BALANCED or UNBALANCED input grounding based on system needs.

Provides alternative grounding connections to help eliminate alternator whine.

Adjusts signal voltage for bass restoration to optimize output and protect speakers.

Details how to connect the unit's power supply via battery and remote wires.

Explains connecting output RCA connectors to next components, inline before a crossover.

Explains how vehicle acoustics, speaker locations, and music affect bass response.

Guidance on selecting different bass output settings based on system voltage.

Provides solutions for issues like the unit not turning on or high distortion.

Lists hardware required for installation: tapping screw, spring washer, plain washer.