Need help?Do you have a question about the Power Acoustik Pwm-70 and is the answer not in the manual?
General| Brand | Power Acoustik |
|---|---|
| Model | Pwm-70 |
| Category | Stereo Equalizer |
| Language | English |
Specifies the frequency ranges for front and rear channels.
Indicates the boost or cut capability of the equalizer bands.
Defines the signal-to-noise ratio for the unit.
Details the unit's frequency response range and tolerance.
Specifies the maximum output voltage the unit can produce.
Total Harmonic Distortion level.
Defines the required input signal level for optimal operation.
Specifies the impedance of the input signal.
Indicates the headroom available to prevent signal overload.
Defines the channel separation performance.
Specifies the required operating voltage and ground.
Specifies the impedance of the output signal.
Provides the physical dimensions of the unit.
Lists key features including output voltage, equalizer bands, and design.
Describes controls located on the front panel for operation.
Details controls found on the top surface of the unit.
Illustrates how to connect the CD changer, AUX input, subwoofer, and speakers.
Provides important recommendations for setting source volume and checking ground.
To Next Page
