To Next Page
S
Savannah RobertsAug 6, 2025
What to do if there is no sound from my Power Acoustik PWM-30M Stereo Equalizer speaker?
- JJohn VegaAug 6, 2025
If there's no sound from the speaker of your Power Acoustik Stereo Equalizer, here's what to check: * Ensure the REM.On connection and +12V power are correctly connected, as the unit may be in sleep mode. * Verify that your front and rear gain settings are properly adjusted. * Confirm that your source volume is up and the input cord is correctly connected to ensure there is an input signal.
General
