Need help?Do you have a question about the Power Bright ML400-24 and is the answer not in the manual?
General| Model | ML400-24 |
|---|---|
| Type | Modified Sine Wave Inverter |
| Input Voltage | 24V DC |
| Output Voltage | 120V AC |
| Output Power | 400W |
| Surge Power | 800W |
| Frequency | 60Hz |
| Efficiency | 90% |
| Low Battery Alarm | Yes |
| Overload Protection | Yes |
| Thermal Protection | Yes |
| Cooling | Fan Cooled |
Safety warnings for inverter output voltage, operating environment, and flammable materials.
Warnings regarding the use of specific battery chargers and small appliances with the inverter.
Critical safety warning about battery explosions and the necessity of installing a fuse.
Precautions regarding loose connections, polarity, and potential damage to cables and the inverter.
Describes the two standard North American AC outlets on the front panel.
Explains the overload indicator light and the function of the ON/OFF switch.
Identifies cooling fans and the fuse cover on the rear panel.
Specifies the positive and negative DC input terminals for connecting the battery.
Guidelines on selecting appropriate wire gauge for connecting inverter to battery bank.
Solutions for no input voltage, inverter shut down, and low battery alarms.
Addresses issues with TVs not functioning correctly with the inverter.
To Next Page
