Need help?Do you have a question about the Power Craft PAC-18/5K2 and is the answer not in the manual?
General| Brand | Power Craft |
|---|---|
| Model | PAC-18/5K2 |
| Category | Power Tool |
| Language | English |
Provides detailed technical specifications for voltage, capacity, charging times, and tool performance metrics.
Lists conformity to relevant EU standards and directives, including EN 60745 and 98/37EEC.
Procedure to lock the direction switch to prevent accidental operation.
Instructions for cleaning the machine housing and ventilation slots.
Note that the machine requires no additional lubrication.
Guidance on addressing faults and ordering replacement parts.
Advice on recycling packaging and proper disposal of the appliance.
Information on where to find the warranty conditions.
Defines symbols used in the manual and on the machine for safety.
Details the components and features of the screwdriver.
Steps for fitting and removing screwdriver bits into the tool.
Information on battery lifespan and optimal charging for longevity.
Instructions for using the screwdriver for fastening and loosening screws.
How to adjust the torque settings on the screwdriver for screws.
Describes the uses of the jigsaw for cutting various materials precisely.
Step-by-step guide for assembling the jigsaw blade.
Instructions for adjusting the bottom plate angle for sawing.
How to start, stop, and use the jigsaw safely.
Details the components and features of the torch.
Instructions for switching the torch on/off and positioning the head.
Guidelines for maintaining a clean, well-lit, and safe work environment.
Precautions regarding plugs, cords, and avoiding electrical hazards.
Advice on staying alert, using safety equipment, and proper attire.
Instructions on proper usage, maintenance, and storage of power tools.
Guidelines for safe handling and charging of battery packs and chargers.
Describes the detail sander's design for dry sanding and working on profiles.
Details the components and features of the detail sander.
Safety advice regarding dust inhalation and eye protection during sanding.
Instructions for easily replacing sanding paper using Velcro fastener.
How to hold and operate the detail sander for best control.
Advice on using qualified experts and original replacement parts for repairs.
Precautions for handling, use, and maintenance of battery packs and chargers.
Procedure for charging batteries, including indicators and temperature limits.
Importance of discharging batteries and warnings about memory and pole effects.
Details the components and features of the cordless drill.
Steps for fitting and removing drill cutters and screwdriver bits.
How to hold and use the cordless drill for drilling and driving.
How to adjust the torque settings on the drill for driving screws.
Instructions on using the direction switch for driving and removing screws.
Guidance on setting the torque adjustment ring to the drilling position.
To Next Page
