Need help?Do you have a question about the Power Craft 69360 and is the answer not in the manual?
General| Model | 69360 |
|---|---|
| Brand | Power Craft |
| Voltage | 230V |
| Frequency | 50Hz |
| No Load Speed | 11000rpm |
| Disc Diameter | 115mm |
| Spindle Thread | M14 |
| Power Source | Electric |
Guide for optimal use and saving safety instructions for future reference.
Identifies key parts: Handle, nozzle, trigger, magazine release, and magazine.
Specifications include capacity, staple size, operating pressure, max pressure, air intake, consumption, vibration, and sound.
Risks and checks for air supply, hoses, pressure, and gas types; emphasizes correct use.
Required checks before connecting air hoses: disconnect supply, check tool status.
Operational safety: protective gear, grip, trigger control, pointing, and environment checks.
Illustrates and lists components for connecting the air supply to the tool.
How to adjust the staple driving depth using the pressure setting button.
Steps for loading staples, gripping the tool, and firing staples.
Procedures for cleaning, lubrication intervals, and checking part condition.
Common issues like air leaks, poor driving, and staple jams with causes and solutions.
Contact details for support, complaints, parts, and returns.
Statement confirming product meets EU directives and standards, including CE marking.
Company commitment to environmental friendliness and compliance with RoHS directives.
To Next Page
