Power Dynamics pdc-30 User Manual

7
At first, place the batteries into the remote
control.
Open the batterycompartment.
Insert the batteries AAA(UM-4),made sure
to match+ and - of the batteries to the marks in
the battery compartment.
Close the battery cover.
NOTE: Improper use of the batteries may
cause battery leakage and corrosion. To
operate the remote control correctly,
follow the instructions below:
Do not insert batteries into the remote control in
the wrong direction.
Do not charge, heat, open or short -circuit
batteries. Do not throw batteries into a fire.
● Do not leave dead or exhausted batteries
in the remote control.
● Do not use different types of batteries
together or mix old and new batteries.
● If you do not use the remote control for a
long period of time, remove the batteries
to avoid possible damage from battery
corrosion.
● If the remote control does not function
correctly or the operating range becomes
reduced, replace all batteries with new one.
● If battery leakage occurs, wipe the battery
liquid from the battery compartment, then
insert new batteries.
The batteries can be used for one year in
normal condition.
Operation of the remote control
This is for instructions how to use the remote
control.
Distance: within 7m from the front of the
remote control sensor.
Angle: within 30
0
each direction of the front of
the remote sensor.
Notes on the remote control
● Do not drop or give the remote
control a shock.
● Do not put heavy object on the top
of the remote control.
● Do not spill water or and liquid on
the remote control.
● Don not open the remote control.

Power Dynamics pdc-30 Specifications

General

Brand	Power Dynamics
Model	pdc-30
Category	Tuner
Language	English