16
4. Start the Engine
Turn the engine switch to the “START” posi-
·
14
·
3. Move governor lever to left a little.
4. Start the engine
1) Recoil starter:
Turn the engine switch to the “ON”
(OPEN) position.
Pull the starter grip lightly until
resistance is felt, then briskly.
Don’t allow the starter grip to
snap back against the engine.
Return it gently to prevent
damage to the starter
STARTING THE ENGINE
THROTTLE HANDLE
HIGH SPEED
LOW SPEED
·
14
·
3. Move governor lever to left a little.
4. Start the engine
1) Recoil starter:
Turn the engine switch to the “ON”
(OPEN) position.
Pull the starter grip lightly until
resistance is felt, then briskly.
Don’t allow the starter grip to
snap back against the engine.
Return it gently to prevent
damage to the starter
STARTING THE ENGINE
THROTTLE HANDLE
HIGH SPEED
LOW SPEED
Engine
Switch
Starter Grip
Engine Switch
-
To Next Page
Loading...