3
For technical questions call: 1-800-665-8685
V 2.0 8384455
18V Impact Driver
SPECIFICATIONS
Chuck Size
1/4”
No Load Speed
2,200 RPM
Impact Rate
2,900 BPM
Max. Torque
150 ft-lb
Output
18V
INTRODUCTION
A powerful, compact cordless impact wrench with electronic variable speed trigger, forward, reverse and trigger lock
control integrated into the housing for ease of use. A superbly balanced tool, with vibration reducing grip.
IMPORTANT SAFETY PRECAUTIONS
WARNING! The warnings, cautions and instructions discussed in this instruction manual cannot cover all
possible conditions and situations that may occur. It must be understood by the operator that common sense
and caution are factors which cannot be built into this product, but must be supplied by the operator.
WARNING! Read and understand all instructions before using this tool. Keep this manual for the safety warnings
and precautions, operating, inspection and maintenance instructions. When using this tool, basic precautions
should always be followed to reduce the risk of personal injury and/or damage to the equipment. Note that when
this manual refers to a part number, it refers to the parts list included. Before allowing someone else to use this
tool, make sure they are aware of all safety information.
WORK AREA
1. Operate in a safe work environment. Keep your work area clean and well lit. Do not use in damp or wet
locations and do not expose this tool to rain. Water entering a power tool will increase the risk of electric
shock. Do not use in the presence of flammable gases or liquids. Power tools create sparks which may ignite
the dust or fumes.
2. Keep anyone not wearing appropriate safety equipment away from the work area. Distraction can cause you
to lose control.
3. Store unused equipment. When not in use, tools must be stored in a dry location to prevent rust. Always
lock up tools and keep them out of reach of children.
To Next Page
Loading...