What to do if my Power Fist 8700718 Inverter generator is running, but does not supply power?
If your Power Fist Inverter generator is running but not supplying power, first ensure the DC circuit breaker is turned ON. Then, stop and restart the engine and check for poor connections and repair them. Also, verify the connected device is working correctly by testing with another device. Check and repair any defective cord sets.
How to troubleshoot a Power Fist 8700718 engine that won't start or runs rough?
If your Power Fist Inverter engine will not start, shuts down, or runs rough, try the following: * If the engine is cold, move the 3-in-1 start switch to CHOKE until warm, then to RUN. * If the 3-in-1 switch is OFF, turn it to CHOKE and pull the recoil starter. * Check and fill the engine oil to the proper level. * Refuel the engine. * Drain any bad fuel from the tank and carburetor and refuel with fresh gasoline. * Inspect, gap, or replace the spark plug. * If the engine is flooded, move the choke to the RUN position. * Clean the spark plug, check the electrode spacing, and ensure the spark lead is connected.
Why does my Power Fist Inverter engine lack power?
If your Power Fist Inverter engine lacks power, try these solutions: 1. Clean or replace the filter element if it's restricted. 2. Drain the fuel tank and carburetor and refuel with fresh gasoline if the fuel is stale. 3. Reduce the wattage load if the generator is overloaded.
What to do if Power Fist 8700718 Inverter engine bogs down when a load is connected?
If the engine of your Power Fist Inverter runs well without a load but bogs down when loads are connected: * Disconnect the device if there is a short circuit. * Clean or replace the fuel filter if it's clogged.
How to fix a Power Fist Inverter engine that hunts or falters?
If your Power Fist Inverter engine hunts or falters: * Move to choke until engine runs evenly if the choke was removed too soon. * Clean or replace the fuel filter if it is clogged.
General| Brand | Power Fist |
|---|---|
| Model | 8700718 |
| Category | Inverter |
| Language | English |
Warns about carbon monoxide dangers from exhaust and lists symptoms of poisoning.
Essential checks before starting and information on DC/AC circuit breakers.
Instructions for properly grounding the generator to prevent electric shock.
Detailed steps for starting the engine, including recoil start method and precautions.
Guidance on connecting appliances, managing loads, and using the ECO switch during operation.
Steps to calculate wattage, prevent overload, and manage overload conditions.
Importance of correct oil, types to use, and warnings against non-recommended oils.
Explanation of the automatic engine shutdown feature for low oil levels.
Step-by-step guide to accurately check the engine oil level.
Instructions for correctly adding engine oil to the generator, ensuring proper level.
Steps for draining used engine oil, emphasizing proper disposal methods.
A schedule detailing maintenance checks and replacements based on usage intervals.
A guide to diagnosing and resolving issues like starting problems, stalling, or lack of power.
To Next Page
