EasyManua.ls Logo

Power Measurement ION 6200 User Manual

Default Icon
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Power Measurement ION 6200 and is the answer not in the manual?

Power Measurement ION 6200 Specifications

General IconGeneral
Display TypeLCD
MountingPanel Mount
Weight0.5 kg
Frequency Measurement Range45 to 65 Hz
Communication PortsRS-485, Ethernet
ProtocolsModbus, DNP3
Storage Temperature-40 to +85 °C
Humidity5 to 95% RH (non-condensing)

Summary

Meter Overview

Front of Meter

Description of front panel displays and controls.

Rear of Meter

Description of rear panel connections and ports.

Step 1: Assemble the Meter

Mounting the Integrated Model

Mounting the TRAN Model

Step 3: Wire the Ground Terminal

Step 4: Wire the Digital Outputs (if equipped)

Step 5: Wire the Voltage and Current Inputs

Potential Transformers

Requirements and specifications for using Potential Transformers.

Current Input Specifications

Current Transformers

4-Wire Wye, 3-Element Direct Connection

4-Wire Wye, 3-Element, 3 PT, 3 CT

4-Wire Wye, 2½-Element, 2 PT, 3 CT

3-Wire Delta, 2½-Element, 2 PT, 3 CT

3-Wire Delta, 2-Element, 2 PT, 2 CT

3 Wire Delta Direct Connection

3-Wire Grounded Wye, 3-Element Direct

Single Phase Connection Diagram

Step 6: Wire the Communications (if equipped)

Step 7: Wire the Power Supply

Power Supply Connections

Step 8: Power Up the Meter

Step 9: Set Up the Meter Using the Front Panel

Configurable Settings

Mode and Polarity Configuration

Settings for Volts Mode, polarity, and transformer ratios.

Communication Settings

Configurable Settings (Continued)

Modbus Scaling and Digital Outputs

Settings for scaling, output modes, and time constants.

Display and Security Settings

Step 10: Verify Meter Operation

Integrated/RMD Model Verification

TRAN Model Verification

Using the Meter

Display Mode

How to view measurement values in display mode.

Meter Operational Modes

Display Mode Button Functions

Reset Mode

How to perform demand and energy resets.

Configuration Mode

Introduction to navigating and editing meter settings.

Button Functions in Configuration Select Mode

Button Functions in Configuration Edit Mode

Password Security

Information Mode

Verifying LEDs and Display Function

Button Functions in Information Mode

Standard Measurements and Enhanced Packages 1 & 2

Meter FAQs

Related product manuals