FEATURES AND CONTROLS
INPUTS: Three Unbalanced (RCA)stereo line inputs, One Balanced (XLR) stereo line input, One Bypass
power amplifier (RCA) stereo input, and One moving magnet phono (RCA)stereo inputs.
OUTPUTS: One stereo pair speaker binding post outputs. One stereo Balanced (XLR) preamplifier
outputs and One Unbalanced (RCA) preamplifier outputs. Also, One stereo headphone ¼” jack output
1. Front panel POWER button turns power on and off.
2. The MUTE button turns the mute on and off. When the power is turned on the mute comes on
automatically. To use the headphones and disconnect the speakers turn on the mute function.
3. The INPUT button selects Input 1, Input 2, Balance Input, Phono input and Input 3 by stepping
sequentially.
4. The VOLUME control located on the front panel operates in all modes except Bypass.
5. The BYPASS button selects the bypass mode.
6. All functions are accessed with the supplied REMOTE CONTROL.
To Next Page
Loading...