To Next PageTo Next Page
Need help?Do you have a question about the POWER ON BOARD VEC280POB and is the answer not in the manual?
General| Voltage | 28V |
|---|---|
| Battery Type | Li-ion |
| Input Voltage | 220-240V |
| Collet Size | 3.2mm |
| Frequency | 50/60Hz |
Details the 12 volt H3, 25 watt bulb used in the spotlight.
Lists the two maintenance-free, sealed lead acid, 6 volt, 4.5 Ah batteries.
Details the 1000mA, 12 volt high frequency charger.
Specifies the operating voltage as 12 volts DC.
Outlines the policy for returning defective products for replacement or repair within the warranty period.
Details exclusions from warranty coverage, such as accessories, normal wear, and misuse.
Instructions for activating the product warranty by completing and mailing a card.
Provides essential safety warnings regarding the handling, disposal, and potential hazards of batteries.
Lists specific safety precautions for operating the spotlight, including heat and lens care.
Highlights the powerful quartz halogen spotlight and the long-life 2-LED area light.
Details the high-pressure inflator, 12V DC accessory outlet, and built-in compressor.
Covers the built-in AC charger, fused DC adapter, and sealed lead acid batteries.
Identifies key components on the control panel including switches, indicators, and fuse slot.
Explains how to check the battery charge level using indicator LEDs.
Provides instructions for charging the unit using the built-in 120V AC adapter.
Details the procedure for recharging the unit via a 12V DC accessory outlet.
Step-by-step guide for inflating items with standard tire valve stems.
Instructions for inflating items using various adapters and the compressor.
Procedure for using the dedicated hose to inflate or deflate items.
Guidance on where to obtain replacement parts like bulbs and batteries.
Detailed steps for safely replacing the spotlight bulb.
Recommendations for battery replacement and environmentally safe disposal.
Instructions on how to replace the fuse in the DC charging adapter.
Steps to diagnose and resolve issues with the charge indicator light not illuminating.
Solutions for common operational problems, such as the unit not powering on.
