POWER ON BOARD WLB26P User Manual

USER’S MANUAL
& WARRANTY INFORMATION
IMPORTANT SAFETY INFORMATION, SAVE THESE INSTRUCTIONS
THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING
THE OPERATION AND WARRANTY OF THIS PRODUCT. PLEASE READ
CAREFULLY BEFORE USE AND RETAIN FOR FUTURE REFERENCE
4140 S.W. 30th Ave., Ft. Lauderdale, FL 33312
Toll Free: (800) 54-HOW-TO
unauthorized use or repair, neglect, misuse, abuse, failure to follow instructions for care
and maintenance, fire, flood and Acts of God.
If your problem is not covered by this warranty, call our Technical Support Department toll
free at (800) 54-HOW-TO for general repair information and charges if applicable.
STATE LAW RIGHTS: This warranty gives you specific legal rights. Some states do not
allow limitations on how long an implied warranty lasts or the exclusion or limitation of
incidental or consequential damages, so the exclusions or limitations stated herein may
not apply. This warranty gives the purchaser specific legal rights; other rights, which vary
from state to state, may apply.
TO REQUEST WARRANTY SERVICE FOR THIS PRODUCT: Contact Technical Support by
telephone, fax or mail (see below). We suggest that you keep the original packaging in
case you need to ship the unit. When returning a product, include your name, address,
phone number, dated sales receipt (or copy) and a description of the reason for return
and product serial number. After repairing or replacing the unit, we will make every effort
to return it to you within four weeks.
WARRANTY ACTIVATION: Please complete Warranty Activation Card and mail to Power
On Board. Enter “WLB26P” as Model and “Bright Bar
™
LED rechargeable Work Light”
as Product Type. All Power On Board products must be registered within 30 days of
purchase to activate this warranty. Mail the completed registration form, along with a
copy of the original sales receipt, to:
Black & Decker
4409 W. Wanda, McAllen, TX 78503
• TOLL FREE: (800) 54-HOW-TO • FAX: (956) 630-0492 •
WARRANTY IS NON-TRANSFERABLE.
BD081906
Bright Bar
™
LED Rechargeable Work Light
© 2006 VECTOR PRODUCTS, INC.
MADE IN CHINA
WLB26P

POWER ON BOARD WLB26P Specifications

General

Brand	POWER ON BOARD
Model	WLB26P
Category	Work Light
Language	English

Summary

Warranty Information

Warranty Activation

Process for activating the product warranty by registration within 30 days of purchase.

Request Warranty Service

Instructions for obtaining product repair or replacement under warranty.

State Law Rights

Explanation of legal rights granted by the warranty that may vary by state.

Important Safety Instructions

Warnings

Critical safety warnings regarding battery disposal, heat exposure, and direct light exposure.

Cautions

Precautions for use, including avoiding high temperatures and submersion in liquids.

Product Introduction and Features

Introduction

Welcome message and recommendation to read the manual for optimum performance.

Features

Details on the LED bar, operation modes, battery, housing, and design elements.

Operating the Unit

Operating the Unit

Instructions on how to position and switch the work light between HIGH, OFF, and LOW settings.

Operating the Unit in Corded Mode

Procedure for connecting the unit to a power source using the AC/DC adapter.

Recharging the Built-in Battery

Steps for charging the Ni-MH battery and indicator light description.

Battery Disposal and Warranty Program

Battery Disposal

Information on proper disposal of the Ni-MH battery and contact for recycling.

Three Year Limited Warranty Program

Details on the limited warranty, coverage, exclusions, and return/repair policy.