POWX0650 EN
Copyright © 2022 VARO P a g e | 2 www.varo.com
WALL SLOTTER
POWX0650
1 INTENDED USE
The machine is designed for dry chase cutting in brickwork and road surfaces. The machine is
suitable for installing electric lines and water pipes in walls or floors and can also be used for
cutting slabs. Strips in slabs can also be cut using the machine. Before using the wall chaser,
familiarize yourself with all the operating features and safety requirements. Not suitable for
professional use.
WARNING! Read this manual and general safety instructions carefully
before using the appliance, for your own safety. Your power tool should
only be passed on together with these instructions.
2 DESCRIPTION (FIG A)
1. Auxiliary handle
2. Spindle lock button
3. Dust extraction adapter
4. ON/OFF switch trigger
5. Safety switch
6. Main handle
7. Carbon brush cover
8. Roller wheel
9. Lock lever for depth stop
10. Cutting depth scale
11. Protective guard cover
12. Diamond cutting discs
13. Output spindle
14. Motor flange
15. Spacer rings (Thickness of all:10mm)
16. Flange nut with spindle sleeve
17. Pin spanner
18. Breaking tool
3 PACKAGE CONTENT LIST
▪ Remove all packing materials
▪ Remove remaining packaging and transit supports (if existing)
▪ Check the completeness of the packing content
▪ Check the appliance, the power cord, the power plug and all accessories for transportation
damages.
▪ Keep the packaging materials as far as possible till the end of the warranty period.
Dispose it into your local waste disposal system afterwards.
WARNING Packing materials are no toys! Children must not play with
plastic bags! Danger of suffocation!
1 machine
1 wrench
2 diamond discs
1 manual
1 breaking tool
If any parts are missing or damaged, please contact your dealer.
To Next Page
Loading...