Power Pressure Cooker XL PPC770 User Manual

Quick Start
Reference Guide*
* This Guide is not a substitute for the Owner’s Manual. Refer to this guide only after you have read the
Owner’s Manual thoroughly.
IMPORTANT: Your Power Pressure Cooker XL
TM
has been shipped with the components shown above. Check everything
carefully before use. If any part is missing or damaged do not use this product and contact shipper using the customer
service number located in the back of the Owner’s Manual.
PPC_770_6QT QUICK START GUIDE_TP_ENG_V1_140723
Measuring
Cup
Steamer TrayLadle
Condensation
Collector
Parts & Assembly
Accessories
Fig. A
Fig. B
Open Position
Lock Position
Step 1
Before using the Power Pressure Cooker XL for the rst time,
wash the Inner Pot, the Lid and the Rubber Gasket with warm
soapy water. Rinse with clean water and dry thoroughly. To
ensure correct tting of the Rubber Gasket, ll the Inner Pot with
water about 2/3 full, place the Lid on the cooker with Handle and
Recessed Valve (Fig. A) pointed to the “10:00 o’clock” position.
Rotate Lid counter-clockwise until you feel a click, then Rotate
the Pressure Valve to the Lock position and run on CANNING
mode for 10 minutes.
Step 2
When the cycle is complete, using tongs or another kitchen tool,
carefully rotate the Pressure Valve to the Open position (Pictured
to the right Fig. B) allowing all pressure to escape. Let the
appliance cool to room temperature. Pour out the water. Rinse
and towel dry the Inner Pot. The Power Pressure Cooker XL is
now ready for use.
WARNING: Avoid serious injury... Never use your hand to set the
Pressure Valve in the Open Position after any cooking process.
Use tongs or some other kitchen tool.
Step 3
Place Inner Pot into the unit and add ingredients for your recipe.
Never load Inner Pot above the MAX line. Rotate the Inner Pot to
make certain that it is seated properly.
Place Lid on Cooker with Handle and Recessed Valve (Fig. A)
pointed to the “10:00 o’clock” position. Rotate Lid counter-
clockwise until you feel a click. Rotate Pressure Valve to the Lock
position. Follow your recipe for cook time.
HOT LID WARNING: Use black composite handle only when
opening lid. The stainless steal parts become very hot and could
burn your hands.
Condensation Collector
The Condensation Collector easily picks up any moisture that
may drip off when using your Power Pressure Cooker XL. Simply
align and push the collector into the channels on the back of the
cooker. Empty and clean after each use.

Power Pressure Cooker XL PPC770 Specifications

General

Brand	Power Pressure Cooker XL
Model	PPC770
Category	Electric Pressure Cooker
Language	English

Summary

Power Pressure Cooker XL Parts and Assembly

Lid and Rubber Gasket

Details on the lid and its rubber gasket for pressure sealing.

Inner Pot

The removable pot where ingredients are placed.

Control Panel and Base

Overview of the cooker's control panel and base unit.

Accessories

Includes measuring cup, ladle, condensation collector, and steamer tray.

Initial Setup and First Use Steps

Step 1: Initial Cleaning and Lid Sealing

Wash components, fit gasket, and perform a 10-minute CANNING cycle.

Step 2: Pressure Release and Cooling

Release pressure safely using tongs and let the appliance cool.

Step 3: Adding Ingredients and Locking Lid

Place ingredients, ensure inner pot is seated, and lock the lid.

Condensation Collector Usage

Condensation Collector Function

Collects moisture drips; align and push into back channels. Empty and clean.