The Power Ridge X-100 Portable AC Power Bank is a versatile and rugged power solution designed for on-the-go charging and powering of various electronic devices. It features multiple charging ports, LED indicator lights, and a compact, travel-friendly design, making it suitable for both home use and outdoor adventures.
Function Description:
The X-100 serves as a portable power bank capable of providing AC power, as well as charging devices via USB-A and USB-C/PD ports. It is designed to keep your electronic devices powered in off-grid situations or when a wall outlet is not available. The device allows for simultaneous charging of the unit itself and connected gear.
Important Technical Specifications:
- Dimensions: 200 x 122 x 30 mm
- Weight: 1020g
- Battery Type: Li-ion
- Capacity: 10.5 Ah
- Material: PC+ABS
- Operating Temperature: 0-40°C (32-104°F)
- Storage Temperature: 0-40°C (32-104°F)
- Input:
- Output:
- USB-C PD Output: 60W
- USB-A Output: 2.4A
- AC Output: 110V
- Total Continuous Output: 100W Max
Usage Features:
- Power Button: A single button on the top of the unit allows users to check the state of charge with a short press and turn on the AC output by holding it.
- LED Indicator Lights:
- Green AC Indicator Light: Illuminates when AC power is active.
- White LED Indicator Lights: Show the current battery level and flash during charging.
- Multiple Charging Ports:
- 1 USB-C Input/Output (45W input, 60W output): Supports fast charging power delivery (PD) for laptops, phones, tablets, DSLR cameras, Bluetooth headsets, and drones.
- 2 USB-A Ports (2.4A output each): Suitable for charging smart watches, e-books, tablets, sports cameras, digital cameras, Bluetooth speakers, wireless headphones, and other USB-enabled devices.
- 1 AC Socket (110V output, 100W max): Powers laptops, game consoles, fans, lights, and other AC-powered devices.
- Charging Methods:
- Wall Charger: Can be charged via USB-C wall charger or USB-A wall charger. For optimal charging, a high-power USB-C PD wall charger (purchased separately) is recommended.
- Solar Panel: Supports charging via solar panels with a USB-C PD interface (PD45W or more recommended). Users should place the solar panel in direct sunlight, avoid shade, and ensure the X-100 is in a cool place to prevent overheating during solar charging.
- Charging Time: Recharges via PD adapter 20V@2.25A in approximately 120 minutes. Actual charging time may vary based on the adapter's power.
- Battery Life Indication: LED lights indicate battery level, with the highest indicator flashing to show current charging progress.
- Simultaneous Operation: The unit can be charged while simultaneously powering or charging other devices.
- Estimated Device Charges:
- Smartphones: Up to 7 charges
- Tablets: Up to 3 charges
- Laptops: Up to 2 charges
- Drones: Up to 2.5 charges
- Cameras: Up to 2 charges
- Speakers: Up to 4 charges
Maintenance Features:
- Storage Recommendations:
- Ideally, the power bank should be kept plugged in when not in use to maintain a full charge and prolong battery life.
- If not plugged in, store the battery at about 50% charge in a clean, dry environment (no more than 75% humidity) at room temperature.
- Fully charge the unit every 3 months if not in continuous use.
- Failure to follow storage guidelines may result in battery damage and void the product warranty.
- Safety Instructions (DANGER, WARNING, CAUTION):
- General Safety: Do not disassemble, modify, or repair the unit. Avoid high heat, fire, and direct sunlight. Do not use or store in wet or dusty environments.
- Connection Safety: Do not connect the output to main power. Only use the output socket for external devices. Do not handle with wet hands or attach metallic objects to AC input/output.
- Fluid Contact: If fluid from inside the unit contacts skin or clothes, wash affected areas immediately with water. If fluid gets into eyes, do not rub; seek medical attention.
- Damage Check: Inspect the unit and power cord before each use. Do not use if damaged or broken.
- Environmental Conditions: Use, charge, and store the unit in ambient temperatures between 0 to 40 degrees Celsius (32 to 104 degrees Fahrenheit).
- Abnormalities: If rust, strange odors, or overheating occur, stop use immediately and contact customer service.
- Physical Impact: If the unit is dropped, falls, or is subjected to vibrations, switch it off immediately.
- Device Connection: Read instructions for electric devices before connecting to the unit. Ensure devices are switched off before connecting.
- Disposal: Do not discard with household waste.
- Power Cords: Only use power cords supplied with the unit.
- Input Voltage: Do not operate at input voltages greater than specified.
- Functionality: Do not use if the unit is not functioning properly.
- Movement: Do not move the unit while it is recharging or in use.
- Pets: Keep pets away from the unit.
- Storms: Unplug the power cord from the socket during a storm.
- Accessories: Use accessories only for their intended uses.
- Troubleshooting:
- LED battery light flashes (2 short, 1 long at 0.5 Hz for 30 seconds): Indicates trigger temperature protection. Solution: Use power supply as specified (0-40 degrees Celsius).
- LED blinks at 4 Hz for 30 seconds: Indicates low battery. Solution: Use power supply as specified (0-40 degrees Celsius) for charging.
- AC LED red light flashes at 4 Hz for 10 seconds: Indicates low battery, inverter over temperature, or short circuit. Solution: Use power supply as specified (0-40 degrees Celsius) for charging, or remove the load and reconnect it.
- FCC Warning Statement: The device complies with FCC rules, but changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. It is designed to provide reasonable protection against harmful interference in a residential installation. If interference occurs, users are advised to reorient/relocate the receiving antenna, increase separation between equipment and receiver, connect equipment to a different circuit, or consult a dealer/radio/TV technician. The device accepts any interference received, including interference that may cause undesired operation.
Need help?
General
To Next Page