This document is an instruction manual for the PowerSmart 21" 2-in-1 Gas Push Lawn Mower, model # DB2321CR. It provides comprehensive information on the safe operation, maintenance, and technical specifications of the device, with sections translated into French and Spanish.
Function Description
The PowerSmart 21" 2-in-1 Gas Push Lawn Mower is designed for residential lawn care, offering both mulching and side discharge capabilities. It is a push-type mower, meaning it requires manual propulsion during operation. The 2-in-1 functionality allows users to choose between returning grass clippings to the lawn as mulch or discharging them from the side. The mower is equipped with an engine start/stop control for safety, which quickly stops the blade when released. It is intended for outdoor use in well-ventilated areas, emphasizing safety precautions against carbon monoxide and flammable fuel vapors.
Important Technical Specifications
- Model #: DB2321CR
- Engine Type: 4-stroke, OHV (Overhead Valve), single cylinder with forced air cooling system.
- Displacement: 144cc
- Fuel Tank Capacity: 0.21 Gallon (approximately 0.79 liters)
- Oil Capacity: 16.9 fl.oz (approximately 0.5 liters)
- Cutting Width: 20.5 inches (approximately 52 cm)
- Cutting Height: Adjustable from 1.18 to 3 inches (approximately 3 to 7.6 cm)
- Height Adjustment: 5 positions
- Drive Type: Push
- Wheel Size: Front: 7 inches; Rear: 8 inches
- Package Dimensions (L x W x H): 33.3 x 22.6 x 16 inches (approximately 84.6 x 57.4 x 40.6 cm)
- Weight: 56 lb. (approximately 25.4 kg)
- Recommended Engine Oil: 10W-30, SF class oil.
- Recommended Gasoline: Fresh (within 30 days of purchase), lead-free gasoline with a minimum of 87 octane rating. Do not mix oil with gasoline.
- Spark Plug Gap: 0.7 to 0.8 mm (0.028-0.031 inches)
Usage Features
The mower is designed for straightforward operation with several user-friendly features:
- Easy Assembly: The manual provides clear instructions for attaching the lower and upper handles, including securing cables with clips and inserting the recoil starter handle cable into its hook.
- Cutting Height Adjustment: The cutting height can be easily adjusted using front and rear levers, offering 5 positions to suit different lawn conditions and desired grass lengths. Users are advised to start with a higher deck height to prevent scalping the lawn.
- Side Discharge: The mower includes a side discharge chute that can be fitted by lifting a spring-loaded cover and sliding the chute's hooks under a hinge pin. This allows for efficient discharge of clippings when mulching is not desired.
- Fuel and Oil Management: Detailed instructions are provided for adding engine oil (10W-30) and unleaded gasoline (minimum 87 octane). Emphasizing the importance of checking oil and fuel levels before each use, and not overfilling the fuel tank to allow for expansion.
- Engine Start/Stop Control: A safety lever ensures that the blade stops quickly when released, preventing unintentional starting and enhancing user safety. The engine is started by engaging this control and pulling the recoil starter handle.
- High Altitude Operation: For operation at altitudes between 3000ft and 8000ft, the manual details the installation of a high altitude kit to ensure optimal performance and compliance with emissions regulations. This involves replacing the main jet in the carburetor.
- Mowing Techniques: Recommendations include using a sharp blade for a clean cut, mowing in straight lines with overlapping swaths, and mowing along inclines rather than up and down to maintain stability. It advises against cutting wet grass and suggests multiple passes for excessively high grass.
Maintenance Features
Regular maintenance is crucial for prolonging the life and ensuring the safe operation of the PowerSmart lawn mower. The manual outlines a comprehensive maintenance schedule and procedures:
- General Safety: Always stop the engine, allow it to cool, and disconnect the spark plug wire before performing any maintenance.
- Deck Care: Instructions for cleaning the underside of the mower deck after each use to prevent grass clipping buildup. This involves running the engine until it's out of fuel, disconnecting the spark plug, tipping the mower (with the air filter facing up to prevent oil spills), and scraping the deck clean.
- Blade Maintenance: Regular inspection for secure attachment, good condition, and sharpness. Damaged or bent blades must be replaced by an authorized service center to avoid vibrations and further damage.
- Oil Check and Change: Daily checks of the engine oil level using the dipstick are recommended. The manual provides steps for checking, adding, and changing oil, emphasizing the use of 10W-30 SF class oil and proper disposal of used oil. Oil changes are recommended after each season or more frequently under heavy load or high temperatures.
- Air Cleaner Maintenance: Routine inspection and cleaning of the air cleaner element to maintain proper airflow to the carburetor. This involves opening the cover, removing and washing the sponge-like element, and replacing the paper element if necessary. Running the engine with a dirty or missing air cleaner can cause premature wear.
- Spark Plug Maintenance: Regular inspection, cleaning, and gapping of the spark plug. The manual provides steps for removing, inspecting for cracks or excessive wear, measuring the gap (0.7-0.8 mm), and reinstalling the spark plug.
- Storage: Detailed instructions for preparing the mower for extended storage (30 days or more), including draining the fuel tank and carburetor bowl, changing the oil, adding a small amount of oil to the cylinder, cleaning the cooling fins and housing, and storing in a well-ventilated area. Neglecting storage preparation can void the warranty for fuel system damage.
- Troubleshooting Guide: A comprehensive table listing common problems, their causes, and solutions to assist users in diagnosing and resolving operational issues.
- Parts List and Exploded Views: Detailed diagrams and lists of all components for both the main mower assembly and the engine, facilitating part identification for repairs and replacements.
- Warranty Information: A three (3) year limited warranty for consumer use, covering defects in material or workmanship. It specifies conditions that may void the warranty, such as normal wear parts, misuse, improper repairs, or issues resulting from stale/contaminated fuel.
To Next Page
Need help?
General
