POWER SMITH PWL110S - Assembly Instruction; Attaching the Hook; Operation; On;Off Switch Operation

FIG 2
2
1
4
English
ASSEMBLY INSTRUCTION
ATTACHING THE HOOK (FIG 2)
Attachthemetalhook(1)tothebracket(2)usingthebolt,
washersandnut,asshowninFIG2.
OPERATION
ON/OFF SWITCH
YourworklightisequippedwithanON/OFFswitch(8-FIG1)onthebacksideoftheworklight.Presstheswitch
once to turn the work light on and press the switch a second time to turn it off. Always turn the work light off before
unplugging.
MAINTENANCE
Your work light requires very little care and maintenance. Simply clean the lens regularly with a non-abrasive cleaner.
Use the similar care for the stand.
WARNING: Always make sure the work light is unplugged and
completely cool before attempting to clean it.
WARRANTY
Thisproductiswarrantedfreefromdefectsinmaterialandworkmanshipfor2(Two)yearsafterdateofpurchase.This
limited warranty does not cover normal wear and tear or damage from neglect or accident. The original purchaser is
coveredbythiswarrantyanditisnottransferable.Priortoreturningyourproducttostorelocationofpurchase,please
calltheToll-FreeHelpLineforpossiblesolutions.
ACCESSORIES INCLUDED IN THIS KIT ARE NOT COVERED BY THE 2 YEAR WARRANTY.
HELP LINE
For questions about this or any other PowerSmith™ product,
PleasecallToll-Free: 888-552-8665
Or visit our website: www.powersmithproducts.com
©Richpower Industries, Inc. All Rights reserved
Richpower Industries, Inc.
736HamptonRoad
Williamston,SC29697
PrintedinChina,onrecycledpaper