EasyManua.ls Logo

Power Stroke PS80516B - Maintenance; Preparing for Use After Storage; Periodic Maintenance Schedule

Power Stroke PS80516B
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 16 — English
MAINTENANCE
Maintenance Items
Perform at every indicated
month or operating hour interval,
whichever comes first
Before
Each
Use
First
month
or 5
hours
Every 3
months
or 25
hours
Every 6
months
or 50
hours
Every
Year
or 100
hours
Every
2 years
or 250
hours
Check and refill engine lubricant
Change engine lubricant *
Check air filter
Clean air filter
Replace air filter
Check and adjust spark plug
Replace spark plug
PERIODIC MAINTENANCE SCHEDULE
NOTE: If a separate engine manual is provided for this pressure washer, please follow the maintenance schedule provided
in the engine manual instead of the maintenance information listed below.
*Change engine lubricant every 25 hours when used under heavy load or in high ambient temperature. Dispose of waste lubricant
safely and responsibly. Do not pour into sewage drains, onto garden soil or into open streams. Your local zoning or environmental
regulations will give you more detailed instructions on proper disposal.
Maintenance items not listed here should be performed by a service center.
PREPARING FOR USE AFTER STORAGE
Pull the recoil starter grip three or four times to clean
lubricant from the combustion chamber.
Remove spark plug from the cylinder. Wipe lubricant from
the spark plug and return it to the cylinder.
Reconnect the spark plug wire.
Refuel the machine as described earlier in the operator’s
manual.

Related product manuals