Page 16 of 41
INTRODUCTION
This generator set is equipped with Power Tech’s advanced PTG series electronic generator controller.
The PTG series controller provides manual and remote starting capability, as well as, other options such
as auto start on low battery and generator exercising. In addition to starting and shutting down the
generator set, the PTG controller monitors and displays engine and generator parameters, such as,
operating hours, engine speed, engine temperature, oil pressure, battery voltage, generator voltage and
frequency. The PTG series controller is also capable of displaying and storing Diagnostic Trouble Codes
(DTC) and faults.
INTERFACE
LCD Display
The LCD display is the primary source of information on the controller. The LCD display allows you to
view and change settings, monitor engine sensors, and monitor generator output.
To Next Page
Loading...
Need help?
General
