POWER USB WATCHDOG - Outlet-3 LED Indication

Power USB
Page 2
Outlet-3 LED Indication
The Outlet-3 LED indicates different states of the Watchdog’s operation inside the
PowerUSB.
LED Activity:
Operation State Indication:
Stays On
Watchdog Disabled. Outlet-3 is On without Watchdog
monitoring.
Slow Blink
(5 seconds)
Watchdog Enabled. Outlet-3 is On with Watchdog monitoring
heartbeats from the attached computer.
Fast Blink
(1 second)
Watchdog is preparing to shutdown the computer. Outlet 3 will
go off after 4 minutes of a blinking start.
Off
Computer is being rebooted or switched off during a scheduled
shutdown.