Power Wheels F-150 - Assembly - Seat and Hood; Installing Seat and Hood

W1070pr-0920
14
ASSEMBLY
•Turnthevehicleupright.
•Insertbothtabsonthebackedgeoftheseatintothe
slots inside the bed.
•Inserttwoscrewsthroughthebackoftheseatand
into the vehicle. Tighten the screws.
25
24
Slots
Seat
Screws
BACK VIEW
•Fitthelongtabsonthehoodintotheslotsinthefront
end of the vehicle.
•Pullthehoodforwardandlower.
Note: The hood is held down by magnets. Simply lift
to open the hood. Do not use around items that are
sensitive to or affected by magnetic fields.
27
•Inserttwoscrewsintothetabsonthefrontedgeof
the seat and tighten.
Screws
Hood
26
TOP VIEW
FRONT VIEW