Power Wheels Wild Thing - Page 3

Rehabilitaon Centre for Children | Power Wheels® Wild Thing™ Early Powered Mobility
Quick Guide
3 Version 1.2
Troubleshoong
Issue
Potenal Resoluon
Lights do not stop blinking on controller.
3 blinks: Joysck not connected, joysck not
calibrated, or incorrect interface is selected. Ensure
joysck is connected and the interface switch is set to
#2
4 blinks: Buon is not reaching neutral state (for
buon interface only)
5 blinks: Le buon value is out of range (for buon
interface only)
6 blinks: Right buon value is out of range (for buon
interface only)
Aer resolving one of the issues above, the blinking
will connue unl the power is reset.
Light is blinking on Fisher Price controller.
The most common is 3 slow ashes followed by 3 fast
ashes, indicang baery needs to be charged. See
Fisher Price user manual for other error codes.
No lights turn on when baery is plugged in.
Baery needs to be charged.
Wiring is damaged. Return to RCC for maintenance.
Vehicle is moving with lile to no input from
user.
Joysck is stuck. Ensure joysck returns to neutral
point on its own.
Joysck is out of calibraon. Return Wild Thing to RCC
for maintenance
Buon (when using buon interface) is stuck. Ensure
the buons return to “o” posion on their own. If
this happens repeatedly, return the buon to RCC to
be replaced.
Lights are solid (no errors) but vehicle will not
move.
Reset the safety stop by removing safety stop lanyard
then clipping it back on.
Technical Support
Assisve Technology Electronics Department
Rehabilitaon Centre for Children
electronics@rccinc.ca
(204) 258-6599