This document describes the Powerworks 19" 60V Self-propelled Lawn Mower (Model 2500613), a cordless, double-insulated lawn mower designed for efficient grass cutting and maintenance.

Function Description:

The Powerworks 19" 60V Self-propelled Lawn Mower is a versatile tool for maintaining lawns. It features a self-propelled function, allowing the user to adjust the speed for comfortable operation. The mower can be used for bagging grass clippings into its 52 L grassbox, or for mulching, which cuts and recuts grass into finer clippings. A side discharge deflector is also included for situations where mulching is not ideal or when side discharge is preferred. The motor control cable, located on the upper handle, engages and disengages the motor and blade, while a height adjustment lever allows for varying cutting heights. A battery key is required to start the mower, enhancing safety by preventing accidental or unauthorized use.

Important Technical Specifications:

Model: 2500613
Width of cut: 46 cm (19 inches)
Height of cut: 25 mm - 80 mm (adjustable)
No-load speed: 2800 rpm
Self-propelled speed: 0.5-1.5 m/s
Sound pressure level (LpA): 73 dB(A), K:3.0
Measured sound power level (LwA): 85.5 dB(A)
Maximum vibration: <2.5 m/s², K=1.5
Grassbox capacity: 52 L
Net weight: 28 kg
Battery type: Lithium-ion (Model numbers 2900413 / 2900513, not included)
Battery charger: Model number 2900313 (not included)
Construction: Double-insulated

Usage Features:

The mower is designed for ease of use and safety.

Assembly: The product requires assembly, including unfolding and adjusting the lower handle (with 3 height positions), installing the upper handle, attaching the grassbox, mulching plug, and side discharge deflector.
Battery Installation and Removal: The battery (not included) is inserted into a dedicated compartment, and a battery key is used to activate the mower. The battery release button facilitates easy removal.
Starting/Stopping: To start, press and hold the safety lock-out button, then pull the power lever. Releasing the power lever stops the mower.
Self-Propelled Mowing: This feature can be engaged by pulling the self-propel lever. The speed can be adjusted using variable speed controls, indicated by "Rabbit" (increase speed) and "Turtle" (decrease speed) symbols.
Cutting Height Adjustment: The height adjustment lever allows users to select cutting heights between 25 mm and 80 mm, suitable for different lawn conditions and seasons.
Mowing Tips: Users are advised to clear the lawn of debris before mowing, cut no more than one-third of the grass length, avoid cutting wet grass, and reduce walking speed when cutting long grass for optimal results.
Slope Operation: Extreme caution is advised when mowing on slopes, with a recommendation not to mow slopes greater than 15 degrees. Mowing across the face of slopes (never up and down) and maintaining firm footing are crucial safety practices.

Maintenance Features:

Regular maintenance is essential for the safe and efficient operation of the lawn mower.

Safety First: Always remove the battery pack and battery key before performing any maintenance to prevent accidental starting.
General Inspection: Before each use, inspect the product for damaged, missing, or loose parts (screws, nuts, bolts, caps, etc.). All fasteners should be securely tightened.
Cleaning: The motor and battery compartments should be kept free from grass, leaves, or excessive grease to reduce fire risk. The underside of the mower deck should be cleaned after each use. The mower should be wiped clean with a dry cloth; pressure washers or running water should not be used.
Lubrication: All bearings are pre-lubricated for the product's lifetime under normal operating conditions, so no further lubrication is required. Wheel components should not be lubricated.
Blade Replacement: The cutting blade should be replaced with authorized replacement parts if it is worn, damaged, or unbalanced. This involves stopping the motor, removing the battery key and battery, tilting the mower, wedging a block of wood to prevent blade rotation, and loosening the blade bolt. The new blade must be properly seated and tightened to the recommended torque.
Environmental Protection: Users are instructed to comply with local regulations for the disposal of packaging, oils, fuels, filters, and deteriorated parts. The machine should not be abandoned in the environment at the end of its service life but taken to a designated collection center for recycling.

Power works 2500613 - Page 2

Table of Contents

Related product manuals