Need help?Do you have a question about the Power works RS 15 A SUB and is the answer not in the manual?
General| Type | Active Subwoofer |
|---|---|
| Enclosure Type | Bass Reflex |
| Amplifier Power | 150W RMS |
| Woofer Size | 15 inches |
| Driver Size | 15 inches |
Covers precautions for water, heat, ventilation, power cords, cleaning, and general handling.
Addresses mains connection, fuses, grounding, servicing, installation location, and accessories.
Details risks of high sound levels and the necessity of wearing ear protection.
Includes advice on opening the unit, hot surfaces, connections, and product compliance.
Introduction to the RS 15 A SUB active subwoofer and its features.
Two balanced XLR ports for audio signal inputs, with parallel 'Through' outputs for connecting additional amps.
Connect satellites (RS 82/RS 122) using Speakon sockets; impedance must be 4 ohms or higher.
Connect to mains power supply; verify local voltage matches device specification to prevent damage.
Switch the system on after all required cords have been connected.
Switch to separate signal ground from chassis ground to eliminate hum loops.
Diagram illustrating stereo connection of the RS 15 SUB A with satellite speakers.
Diagram illustrating mono connection of the RS 15 SUB A with satellite speakers.
Details on input types, impedance, sensitivity, and speaker output connectors.
Provides data on power output, crossover frequency, and sound pressure levels.
Includes protection class, power consumption, voltage range, ambient temperature, and fuse types.
Certification of compliance with European directives for electromagnetic compatibility and low voltage.
To Next Page