19
Step 2 - Start/stop bar activation
Pull the start/stop bar towards you.
Step 3 - Pull cord handle
With the right hand, slowly but firmly pull the starter handle and
rope from the pull cord guide until you feel resistance, then pull
briskly. If the engine fails to start after three pulls, repeat the
start process. When the engine starts, gently return the starter
rope to the pull cord guide.
To stop, release stop/start bar
Step 4 - Self propelled mowing
Engage the propulsion lever, the mower will move forward
automatically with, release the propulsion lever, the mower will
stop move.
Engine start
Engine stop
To Next Page
Loading...
