To Next PageTo Next Page
Need help?Do you have a question about the PowerBass S-6903 and is the answer not in the manual?
Paper cone with Dynamic Damping Coating for warm sound and uncompromised fidelity.
Silk dome tweeters for accurate high frequencies; some models use PEI or mylar.
Designed to fit most OEM speaker applications for easy installation behind factory grills.
Double pressed treated foam surround ensures linear travel for more bass and higher efficiency.
Tweeter ring design to re-focus high frequencies for a more spacious sound.
Includes acoustically transparent speaker grills, mounting hardware, and wiring harness.
Supply speakers with enough unclipped amplifier power to avoid damage from underpowering or clipping.
Utilize separate amplifiers and electronic crossovers for better system performance and less stress.
Use mounting panels (Masonite or MDF) to prevent sound cancellation from front to rear.
Ensure correct polarity when connecting speaker wires for optimum sound reproduction.
Use weather stripping to ensure a tight seal for maximum dynamic performance.
Avoid mounting speakers or external crossovers in locations where they can get wet.
Follow the golden rule 'Measure twice...cut once' for accurate installations.
Designed as drop-in replacements for dash speakers, may require dash or grill removal.
Check door assembly operation and stabilizer stops to ensure proper speaker placement.
Check trunk suspension and tension bars for interference during rear deck installation.
Details model numbers, sizes, and OEM drop-in replacement capabilities.
Provides nominal impedance, frequency response, and sensitivity ratings.
Lists magnet size, mounting depth, and power RMS/peak ratings.
Covers defects in material and workmanship for one (1) year.
Applies to US sales by authorized dealers; requires original dated receipt for service.
Excludes damage from bent frames, water, abuse, clipping, or improper installation.
Contact customer service for RA#, ship product with receipt and handling fee.
General| Speaker Type | 3-Way |
|---|---|
| Power Handling (RMS) | 150 Watts |
| Impedance | 4 Ohms |
| Sensitivity | 92 dB |
| Size | 6" x 9" |
