OPERATING INSTRUCTIONS
G)
Connect the inverter. (See Connecting Inverter Cables
section).
® Press and hold the On/Off button for 3
seconds
to turn on
the inverter.
® The LCD
backlight
will turn to blue, and Input Volts and
Output Watts will show on the LCD screen, indicating the
inverter is receiving power.
@ Press
and
hold the On/Off button for 3 seconds to turn off
the inverter. The internal speaker may make a brief
"beep"
sound. This is normal.
® Make sure the
device
to
be
operated is turned off.
® Plug the
device
into the inverter's AC outlet.
(J)
Press
and
hold the On/Off button for 3 seconds to turn on
the inverter.
® Turn the
device
on.
® To disconnect, reverse the above procedure.
NOTE: If more than one
dev
ice is
to
be powered, start one device
at a time, to avoid a power surge and overloading the
inverter. The surge load of each device should not exceed
the inverter's continuous operation wattage rate.
06
To Next Page