ENGLISH
7
OPERATION
SWITCHING ON/OFF
The multiple socket is activated and deactivated
by use of the on/off switch 1 .
PROCEDURE WITH CONTROL LIGHT OFF
Generally the overvoltage protection device
works without affecting the operating connected
devices.
Control lamp 2 only goes off in case of an over-
load caused by a too high overvoltage.
There is no overvoltage protection pro-
vided if control lamp 2 does not light up.
The multiple socket can still be used in
such case, however, it is highly recom-
mended to replace it due to the missing
overvoltage protection.
270224_pow_Überspannungsschutzleiste_PL_CZ_SK_LB4-2.indb 7270224_pow_Überspannungsschutzleiste_PL_CZ_SK_LB4-2.indb 7 31.07.2015 12:59:1731.07.2015 12:59:17
To Next Page
Loading...
Need help?
General