PAWSB 12 A1
■ 2
│
GB
│
CY
Introduction
Congratulations on the purchase of your new appliance.
You have clearly decided in favour of a quality product.
These operating instructions are a part of this product.
They contain important information in regard to safety, use
and disposal. Before using the product, familiarise yourself
with all of these operating and safety instructions. Use the
product only as described and only for the specified areas
of application. In addition, pass these documents on,
together with the product, to any future owner.
Intended Use
The appliance is intended for checking the charge of a
12 volt battery. In addition, the charging function
of a generator can also be tested. The appliance is not
meant for commercial use.
Package contents
Battery & Alternator Tester PAWSB 12 A1
2 quick-connect terminal clamps, permanently mounted
(1 red, 1 black)
Operating instructions
Safety instructions
Danger! Avoid danger to life and
limbs caused by improper use!
Ɣ Do not operate the appliance with a damaged cable.
Ɣ The measurement cable must be placed so that they
cannot be caught by rotating parts within the engine
compartment.
CAUTION! Damaged measurement cables
create a life-threatening risk of electric shock.
Ɣ Dispose of the device when the measurement cables
have become damaged. The measurement cables
are not intended to be repaired.
Danger of explosion and fire! Make cer-
tain that explosive or combustible substances, such
as petrol or solvent, cannot be ignited during use of
the appliance!
Ignition sources (e.g. open light, burning cigars,
cigarettes or electric sparks) must be kept away from
the starter batteries.
To Next Page
Loading...
Need help?
General