Need help?Do you have a question about the Powerfix Profi PDM 300 B1 and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| Model | PDM 300 B1 |
| Display | LCD |
| Max DC Voltage | 600V |
| Max AC Voltage | 600V |
| Max DC Current | 10 A |
| Max AC Current | 10 A |
| Safety Rating | CAT III 600V |
| Measurement Functions | AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency |
| Frequency Range | 10 Hz to 200 kHz |
| Battery | 9V |
| Resistance Measurement | 0.1Ω - 20MΩ |
Steps to insert or replace the multimeter's 9V battery.
How the "OL" indicator signals exceeding the measurement range.
Connect leads and set range for DC voltage measurements.
Connect leads and set range for AC voltage measurements.
Connect leads and set range for AC current measurements.
Connect leads and set range for DC current measurements.
How to use the 1kHz square wave signal for testing.
Steps for measuring electrical resistance using the multimeter.
How to perform a continuity test with the multimeter.
Procedure for testing diodes with the multimeter.
How to save or release the current measurement displayed.
Instructions for using the multimeter's built-in stand.
When maintenance is required and who should perform it.
Step-by-step guide to replacing the multimeter's fuses.
Proper methods for cleaning the multimeter's exterior.
To Next Page
