Need help?Do you have a question about the Powerfix Profi PDM 250 A2 and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| Model | PDM 250 A2 |
| Measuring Current DC | 10 A |
| Measuring Current AC | 10 A |
| Diode Test | Yes |
| Continuity Test | Yes |
| Battery Test | 1.5 V / 9 V |
| Display | LCD |
| Temperature Measurement | No |
| Display Digits | 3.5 |
| Measuring Voltage DC | 600 V |
| Measuring Voltage AC | 600 V |
| Battery | 9V |
| Safety Rating | CAT III 600V |
Defines the multimeter's purpose and limitations for private use only.
Key safety symbols and essential precautions for safe operation.
Detailed warnings about electrical hazards, shock risks, and proper handling.
Steps for unpacking and checking the multimeter and accessories for damage.
Step-by-step guide to safely replace or install the multimeter's 9V battery.
Initial setup, turning on, and understanding the '1' overflow indicator.
Instructions for correctly measuring DC voltage with the multimeter.
Instructions for correctly measuring AC voltage with the multimeter.
Procedures for measuring both AC and DC currents, including range selection.
How to test the voltage of batteries using the multimeter's dedicated function.
Procedures for measuring resistance and checking continuity with the multimeter.
How to perform diode tests and use the value-saving HOLD function.
Using the multimeter with one hand and setting up/hanging it with the holster.
When maintenance is needed, and how to safely replace the multimeter's fuses.
Guidelines for cleaning the device safely and effectively.
Information on proper disposal of the device and batteries according to regulations.
Details on European directives and standards the product complies with.
To Next Page
