Powerfix Profi PDM 250 A2 User Manual

POWERFIX PDM 250 A2
English - 15
One-hand operation
You can also use the multimeter with one
hand. To do so, insert a test probe [7] in one
of the slots on the back of the holster [2]. You
can then perform your measurements as usual
without having to put down the multimeter.
Setting up/hanging up the multimeter
You can set up or hang up the multimeter
using the holster [2]. Open out the stand at the
back of the holster [2] to set up the multimeter.
There is also a slot above the stand to
facilitate hanging up the multimeter.
Cleaning / maintenance
Maintenance
Maintenance work is necessary if the multimeter has been damaged or if liquid or objects
have penetrated inside the housing, the multimeter has been exposed to rain or moisture or
if it does not work correctly or has been dropped. In these cases, the multimeter should not
be used until it has been inspected by authorised service personnel. Only have qualified
personnel carry out the maintenance work on the device.

Powerfix Profi PDM 250 A2 Specifications

General

Brand	Powerfix Profi
Model	PDM 250 A2
Category	Multimeter
Language	English