Powerfix Profi PGH 17 A1

Other manuals for Powerfix Profi PGH 17 A1

Operation And Safety Notes Original Operating Instructions70 pages

Questions and Answers

D
Dylan CookAug 10, 2025
What to do if the burner flame goes out during operation on my Powerfix Profi Gas Heater?
- K
  Kenneth BennettAug 11, 2025
  If the burner flame goes out during operation of your Powerfix Profi Gas Heater, several factors could be at play. First, the thermal element might not be warm enough, in which case you should try switching it on again. Second, check for blockages in the air inlet and/or outlet, and clean the air inlet grille, remove any obstructions, and verify the fan's operation. Also, ensure there is proper mains voltage by checking the voltage supply and replacing the power cable if needed. Finally, wind or draughts might be blowing out the flame; position the equipment away from such conditions, let it cool, and then retry switching it on.
C
Christine JonesAug 16, 2025
Why is there no gas flow in my Powerfix Profi PGH 17 A1 Gas Heater?
- A
  annafoleyAug 16, 2025
  If your Powerfix Profi Gas Heater has no gas flow, there are a few things to check: * First, ensure that the gas cylinder is not empty and replace it if it is. * Second, verify that the gas cylinder valve is open, and if not, open it. * Lastly, the safety valve in the equipment may not have released the gas yet, so try switching it on again.
A
Ashley ClarkAug 23, 2025
What to do if my Powerfix Profi PGH 17 A1 Gas Heater does not ignite?
- V
  Vincent JacksonAug 23, 2025
  If your Powerfix Profi Gas Heater does not ignite, there are several potential causes. Check the ignition cable for any defects and replace it if necessary. Also, ensure the ignition cable is securely connected. Finally, verify that the distance between the electrode and the burner is correctly set to 5 mm.
K
kcampbellAug 29, 2025
Why is the gas input too high or the flame too big on my Powerfix Profi Gas Heater?
- J
  Joseph ChavezAug 29, 2025
  If the gas input is too high or the flame is too big on your Powerfix Profi Gas Heater, the pressure regulator might be defective. Replace the pressure regulator to resolve this issue.
T
Tiffany TaylorSep 3, 2025
How to fix a Powerfix Profi Gas Heater when the fan does not run?
- T
  Timothy BradleySep 3, 2025
  If the fan on your Powerfix Profi Gas Heater isn't running, the issue might be due to a lack of electricity. Check the power plug and the voltage supply. If necessary, replace the power cable.

Powerfix Profi PGH 17 A1 Specifications

General

Brand	Powerfix Profi
Model	PGH 17 A1
Category	Gas Heater
Language	English

Powerfix Profi PGH 17 A1 - User Manual

Table of Contents

Other manuals for Powerfix Profi PGH 17 A1

Questions and Answers

Powerfix Profi PGH 17 A1 Specifications