To Next PageTo Next PageWhat to do if both nozzles are not spraying on my Powerhorse 49438 Ultrasonic Jewelry Cleaner?
If both nozzles are not spraying, the cause may be a dirty filter. To resolve this, clean or replace the filter. Refer to the Maintenance section for instructions on how to do this.
How to fix a blocked nozzle on Powerhorse Ultrasonic Jewelry Cleaner?
If the nozzle is blocked and not spraying, it's likely due to a dirty nozzle. You can fix this by twisting the nozzle off and cleaning it with a needle or paperclip.
Why won't the caster roll or swivel on my Powerhorse 49438?
If the caster won’t roll or swivel, it's probably because of dirt in the caster. Cleaning the caster should resolve this issue.
What to do if the Powerhorse 49438 Ultrasonic Jewelry Cleaner sprays outward from the sealing lip?
If the spray is coming out from the sealing lip, the cause is a damaged sealing lip. Replace the sealing lip with part number 49438.20.
General| Brand | Powerhorse |
|---|---|
| Model | 49438 |
| Category | Ultrasonic Jewelry Cleaner |
| Language | English |
