WARNING! Fuel and its vapors are
extremely flammable and explosive.
Fire or explosion can cause severe burns
or death.
WHEN ADDING FUEL
• Turn pressure washer OFF and let it cool at least
2 minutes before removing gas cap.
• Fill fuel tank outdoors.
• DO NOT overfill tank. Allow space for fuel
expansion.
• Keep fuel away from sparks, open flames, pilot
lights, heat, and other ignition sources.
• DO NOT light a cigarette or smoke.
WHEN OPERATING EQUIPMENT
• DO NOT tip engine or equipment at angle which
causes fuel to spill.
• DO NOT spray flammable liquids.
WHEN TRANSPORTING OR REPAIRING
EQUIPMENT
• Transport / repair with fuel tank EMPTY or with
fuel shutoff valve OFF.
WHEN STORING FUEL OR EQUIPMENT WITH
FUEL IN TANK
• Store away from furnaces, stoves, water heaters,
clothes dryers or other appliances that have a pilot
light or other ignition source because they can
ignite fuel vapours.
!
WARNING! The high pressure stream of
water that this equipment produces can
pierce skin and its underlying tissues,
leading to serious injury and possible
amputation.
• NEVER aim spray gun at people, animals or plants.
• DO NOT allow CHILDREN to operate pressure
washer.
• NEVER repair high-pressure hose. Replace it with
an equivalent rated hose.
• Keep high pressure hose connected to pump and
spray gun while system is pressurised.
WARNING! Starter and other rotating parts
can entangle hands, hair, clothing, or
accessories.
• DO NOT wear loose clothing, jewellery or anything
that may be caught in the starter or other rotating
parts.
• Tie up long hair and remove jewellery.
WARNING! High pressure spray can cause
paint chips or other particles to become
airborne.
• Always wear eye protection when using this equip-
ment or in vicinity of where equipment is in use.
WARNING! Unintentional sparking can
result in fire or electric shock.
WHEN ADJUSTING OR MAKING REPAIRS
TO YOUR PRESSURE WASHER
• Disconnect spark plug wire from spark plug and
place wire where it cannot contact spark plug.
!
!
!
!
WARNING! Running engines produce heat
and hot exhaust gases.
Temperature of muffler and nearby areas
can reach or exceed 150°F (65°C).
Fire or severe burns can occur.
• DO NOT touch hot surfaces.
• Stay clear of exhaust gases.
• Allow equipment to cool before touching.
• Do not allow high pressure hose or inlet hose to
come in contact with hot muffler.
!
POWERJET HIGH PRESSURE CLEANER
5.
To Next Page
Loading...