26
SPECIFICATION
Dimensions
Model PD210E
LengthhWidthhHeight 29h22h22 in (712h540h540mm)
Dry weight 217.8 lb (98kg)
Engine
Model 190FE
Engine type 4-stroke, overhead valve, single cylinder
Displacement (BorehStroke) 25.6cu in (419cc) 3.54h2.6 in (90h66mm)
Compression ratio 8.0:1
Engine speed 3.600 rpm
Cooling system Forced air
Ignition system Transistorized magneto
Oil capacity 1.16 US qt (1.1Lˈ 0.97 imp qt)
Fuel tank capacity 6.6 US gal (25L)
Spark plug BPR5ES (NGK), W16EPR-U (DENSO), F7RTC
Generator
Rated current 160A
Rated voltage 28.5V
Welding current 50-210A
Duty cycle 60% -160A
DC
(WELDING)
Output
Electrode diameter 3/32, 1/8, 5/32 in (2.6-4.0mm)
Rated voltage 120V
Rated frequency 60Hz
Rated amperage 29A
Rated output 3500W
AC Output
Max. output 4000W
Tune-up Specifications
ITEM SPECIFICATION MAINTENANCE
Spark plug gap 0.028-0.031 in (0.70-0.80mm) Refer to page: 23
Valve clearance
IN: 0.15f0.02mm (cold)
EX: 0.20f0.02 mm (cold)
See your authorized our
dealer
Other specifications No other adjustments needed
NOTE: Specifications may vary according to types, and are subject to change without notice.
To Next Page
